68
Edit a Waypoint
Waypoint Name
To edit a waypoint name, press FIND ↓ to MY WAYPOINTS|ENT. Press
ENT|↓ to desired waypoint name|ENT|→ to EDIT NAME|ENT. Use the ↑
and ↓ keys to select the first character, then press → to move to the
second character and so on. Press
ENT when you are finished. To return
to the main page display, press
EXIT|EXIT.
Waypoint Symbol
To edit waypoint symbol, press FIND|↓ to MY WAYPOINTS|ENT. Press
ENT|↓ to desired waypoint name|ENT|→ to EDIT SYMBOL|ENT. After the
Select Symbol menu appears, use the arrow keys to select the desired
symbol and press
ENT. To return to the main page display, press
EXIT|EXIT.
Waypoint Position
To edit waypoint position, press FIND|↓ to MY WAYPOINTS|ENT. Press
ENT. Use ↓ and ↑ to select a waypoint name|ENT|→ to EDIT POSI-
TION
|ENT.
1. Latitude: select
LATITUDE and press ENT. Use ↑ ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT.
2. Longitude: press ↓ to
LONGITUDE|ENT. Use ↑ ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT.
3. When latitude and longitude are correct press
EXIT repeatedly to get
back to the main page display.
Tip
You can also use the Cursor to reposition the waypoint. Select Use
Cursor from the Edit Position page and press
ENT. Move the cursor
to the spot where you want to put the waypoint and press
ENT.
Waypoint Altitude
To edit waypoint altitude, press FIND|↓ to MY WAYPOINTS|ENT. Use ↓ and
↑ to select a waypoint name|
ENT|→ to EDIT ALTITUDE|ENT.
1. Use ↑ or ↓ to change the first character, then press → to the next
character and repeat until altitude is correct. Press
ENT.
2. To return to the main page display, press
EXIT|EXIT.