Filter
Top Products
43
Cancel Navigation: turns off the navigation command after you have
reached your destination.
GPS Setup: gives access to GPS receiver options, like GPS Simulator,
Track Smoothing and GPS Auto Search.
System Setup: give access to general configuration options like, Units
of Measure, Set Local Time, Reset Options, Popup Help and Transfer
My Data.
Utilities: allows users to modify settings for Sun/Moon calculator,
Trip Calculator, Timers and Alarm Clock.
Easy Mode: used to switch from Advanced Mode to Easy Mode. Easy
Mode shows only the most commonly used features to simplify the in-
terface and operation.
Browse MMC Files: used to save/load GPS data files to an MMC card.
Pages
Advanced Mode has five Page displays. They are the Satellite Status
Page, Digital Data page, Navigation Page, Music Page and Map Page.
The pages are accessed by pressing the
PAGES key. Pressing PAGES
repeatedly scrolls through the four screens in an endless loop.
Each Page has its own menu. You can access a page menu by pressing
the
MENU key while the page is displayed. Pressing the Menu key twice
will always take you to the Main Menu.
NOTE:
In Advanced Mode, you can remove pages you do not want to have
in the Pages rotation. Press
MENU|MENU, then scroll down to SYS-
TEM
SETUP and press ENT. Press ↓ to CHOOSE VIEWABLE PAGES and press
ENT. Use the ↓ ↑ keys to select desired pages, then press ENT to
turn them on (check) or turn them off (uncheck).
Satellite Status Page
This page provides detailed information on the status of the iFINDER's
satellite lock-on and position acquisition. No matter what page you are
on, a flashing current position indicator/question mark symbol and
flashing GPS data displays indicate satellite lock has been lost and
there is no position confirmed. This page shows the quality and accu-
racy of the current satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!