Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
1212 13
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
Detaching The Front
Panel
Youcandetachthefrontpaneltoprevent
theft.
Press the <0> button for
1 second to open the front panel.
0
NOTE
•Youcansetthefrontpaneltoopenautomatically
whentheignitionisturnedoff.SeeMonitor
angle control (P.74).
Detach the panel as the diagrams
below.
2
3
1
4
NOTE
•Theattachingplateclosesautomaticallyinabout
10secondsafterthefrontpanelisreleased.
Removethepanelbeforethishappens.
After detaching:
Putthepanelintheprotectivebag
suppliedwiththeunit.
NOTE
•Topreventdeterioration,donottouchthe
terminalsoftheunitandfaceplatewithyour
fingers.
•Iftheterminalsontheunitorfaceplategetdirty,
wipethemwithacleansoftdrycloth.
Attaching the front panel
Hold the panel securely so as not
to drop it accidentally, and fit it
onto the attaching plate until it is
firmly locked.
1
1
2
1
2
1
Operating With The Top Menu Screen
MostfunctionscanbeperformedfromtheTopMenuscreen.
Touch [Menu] on any screen.
NOTE
•If[Menu]isnot
displayedduring
video/picture
playback,pressthe
<MENU>button.
(P.6)
TopMenuscreenappears.
NOTE
•Youcanselectthe
hidingiconby
scrollingthescreen
leftorright.
Fromthisscreen,youcanperformthefollowingfunctions.
Function Icon Operation
Switchtheaudiosource
etc.
Touchtheiconofthe
desiredsource.
Entersetupmode
etc.
Touchtheiconofthe
desiredsetupfunction.
Displaynavigation
screen
or
Touch[NAV]or
navigationinformation.
Turnoffallaudio
function
Touch[STANDBY].
1
Continued
 previous next