Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
6060 61
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Operations during a call
Adjust the receiver volume
Pressthe<∞>or<5>button.
Switch the voice output
Touch[
]toswitchthevoiceoutput
betweenphoneandspeaker.
Output the dial tone
Touch[DTMF]todisplaythetoneinputscreen.
Youcansendtonesbytouchingdesiredkeys
onthescreen.
Call waiting
Ifyoureceiveacallduringanothercall,you
canansweritwiththecurrentcallsuspended
orswitchbetweenthecurrentcalland
waitingcall.
Answer the new incoming call
Touch[
].Thecurrentcalliskeptsuspended.
Switch between the current and waiting call
Touch[ ]again.
Eachtimeyoutouch[
],thecallingpartyis
switched.
Terminate the current call
Touch[
].
Thecallswitchestothewaitingone.
Bluetooth Setup
YoucanregisterPINcode,selectthedevice
toconnect,andperformoutputsetup.
1
Press the <TEL> button.
Hands Free screen appears.
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Register the PIN code (P.61)
• Select the unit to connect (P.56)
• Set up output (P.61)
Registering Bluetooth unit PIN
code
YoucansetthePINcodetotheBluetooth
unit.Thecodeisacquiredwhenregistering
(pairing)fromthecell-phoneoraudioplayer
side.
1
Touch [SET] of [Receiver PIN Code] in
the Bluetooth SETUP screen.
Receiver PIN Code Set screen appears.
2
Enter a code number and touch
[Enter].
NOTE
•Ifyouwanttocanceltheregistration,touch
[Cancel].
•Ifyouwanttocleartheenterednumber,touch
[Clear].
Bluetooth output setup
Youcanselectspeakerstooutputthesound
fromcell-phone(suchasphonecallvoice
andringingtone)andBluetoothaudio
player.
1
Touch [Front Only] or [All] of
[Bluetooth HF/Audio] in the Bluetooth
SETUP screen.
Front Only
Outputsfromthefrontspeakers.
All
Outputsfromallspeakers.
Hands-Free Control
Youcanperformvarioussetupabouthands-
freefunction.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch desired key in the Hands Free
screen.
See the following section for each setting.
• Set up the Hands-Free system(P.62)
• Set up SMS (P.63)
• Preset the phone number (P.65)
 previous next