Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
5454 55
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
UsingtheBluetoothfunction,various
functionscanbeused:listeningtotheaudio
file,making/receivingacall.
About the cell-phone and
Bluetooth audio player
Thisunitconformstothefollowing
Bluetoothspecifications:
Version
BluetoothVer.3.0Certified
Profile
Cell-phone:
HFP(HandsFreeProfile)
OPP(ObjectPushProfile)
PBAP(PhonebookAccessProfile)
SYNC(SynchronizationProfile)
Audio player:
A2DP(AdvancedAudioDistributionProfile)
AVRCP(Audio/VideoRemoteControlProfile)
NOTE
•Forthecell-phonesverifiedforcompatibility,
accessthefollowingURL:
http://www.kenwood.com/cs/ce/bt/.
•TheunitssupportingtheBluetoothfunctionhave
beencertifiedforconformitywiththeBluetooth
Standardfollowingtheprocedureprescribedby
BluetoothSIG.
However,itmaybeimpossibleforsuchunitsto
communicatewithyourcell-phonedepending
onitstype.
Registering And Connecting Bluetooth Unit
ItisnecessarytoregistertheBluetoothaudio
playerorcell-phonetothisunitbeforeusing
theBluetoothfunction.
Youcanregisterupto5Bluetoothunit.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit (P.55)
• Connecting the Bluetooth unit (P.56)
Bluetooth Control
Registering the Bluetooth Unit
1
Touch [SET] of [Regist New Device].
Searched Device List screen appears.
NOTE
•Anewdevicecannotberegisteredifthereare5
registeredBluetoothunits.Deleteunnecessary
registration.SeeConnecting the Bluetooth unit
(P.56).
•IfaBluetoothunitcannotberegisteredbynormal
register(pairing)operation,touch[SPDEV].For
details,seeRegistering special Bluetooth unit
(P.56).
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
•Iftheunitcannotbesearchedinstep1,youcan
searchtheunitagainbytouching[Search]in
abovescreen.
•Touch[Cancel]tocancelsearchingforthe
Bluetoothunit.
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears
again.
4
Select the Bluetooth unit to register
from the list.
The Connection Device List screen
appears.
NOTE
•Registeringoperationcanbeperformedfromthe
Bluetoothunit.Inthisoperation,enteringthePIN
codeisnecessary.SeeRegistering Bluetooth
unit PIN code (P.61).
•Ifregisteringcannotbecompletedevenwhen
thePINcodeiscorrect,tryRegistering special
Bluetooth unit (P.56).
 previous next