Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
5050 51
Return to the Top page
Radio, TV
Return to the Top page
Radio, TV
Manual memory
Youcanstorethecurrentreceivingstationor
channelinmemory.
1
Select a station or channel you wish
to store in memory.
NOTE
•ForTV,touchcenterbottomareaofthescreenif
sourcecontrolscreenisnotdisplayed.
2
Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
Selecting Operation
Preset select
Youcanlistandselectmemorizedstationor
channel.
Selecting from the multi function menu
1
Touch the desired number from P1
to P6.
The unit will tune to the selected station
or channel.
Selecting from the preset list
1
Touch illustrated area.
List Control screen appears.
2
Select a station or channel from the
list.
Search by program type
(FM tuner only)
Youcantunetoastationwithaspecific
programtypewhenlisteningtoFM.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [PTY] in the multi function
menu.
TUNER PTY Mode screen appears.
3
Select a program type from the list.
4
Touch [Search].
You can search a station of the selected
program type.
Traffic Information
(FM Tuner Only)
Youcanlistenandwatchthetraffic
informationautomaticallywhenatraffic
bulletinstarts.
However,thisfeaturerequiresaRadioData
SystemthatincludestheTIinformation.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
TheTrafficInformationscreenappears
automatically.
NOTE
•ItisnecessarytohaveTrafficInformationfunction
settooninordertohavetheTrafficInformation
screenappearautomatically.
•Thevolumesettingduringreceptionoftraffic
informationisautomaticallystored.Thenexttime
thetrafficinformationisreceived,thisunitrecalls
thevolumesettingautomatically.
 previous next