Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
8888 89
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
Highway sound setting
Youcanboostacertainrangeofsoundthat
becomeshardtohearduetoroadnoise.
1
Touch [Highway Sound] in the Sound
Effect screen.
Highway Sound screen appears.
2
Select the boost level from among
[High], [Low], and [OFF].
Elevation
Youcanraisethesoundpositionheardfrom
thespeakersvirtually.
1
Touch [Elevation] in the Sound Effect
screen.
Elevation screen appears.
2
Select Elevation level from [High],
[Low], and [OFF].
Realizer and Supreme
Youcanrestorethesoundlostduetoaudio
compressiontoarealisticsound.
1
Touch the screen in the Sound Effect
screen.
Realizer
Realizerissoundenhancementandboosting
lowfrequencies(bassboost).
Selectthelevelfrom“OFF”/“Level1”/“Level2”/
“Level3”.
Supreme
TurnsON/OFFtheSupremefunction.
Technologytoextrapolateandsupplement
withproprietaryalgorithm,thehigh-frequency
rangethatiscutoffwhenencoding.
ThisfunctionworksonDVDMEDIA,USB,SD
andiPodsources.
Zone Control
Youcanselectdifferentsourcesforboth
frontandrearpositionsinthevehicle.
1
Touch [Zone Control].
Zone Control screen appears.
2
Touch [Dual Zone].
3
Set each source as follows.
[3] (Front Source, Rear Source)
Selecttheaudiosourceforeach.
[∞], [5] (Rear VOL.)
Adjuststherearchannelvolume.
[Single Zone]
Touchtoturnoffthedualzonefunction.
NOTE
•Whentherearspeakersoundisswitched,the
audiosourcethatisoutputattheAVOUTPUT
terminalisalsoswitchedtothesamesource.
•Whenthedualzonefunctionissettoon,the
followingfunctionsarenotavailable.
•Outputfromthesubwoofer
•SubwooferLevel/BassBoost(P.85)
•EqualizerControl/SoundEffect/Listening
Position(P.86, 87, 90)
•DSPBypassControl/SpeakerSetup/CarType
Setup(P.85, 82, 84)
 previous next