Kenwood DNX9210BT GPS Receiver User Manual


 
4040 41
Return to the Top page
CD, Disc, iPod, USB device, SD card
Return to the Top page
CD, Disc, iPod, USB device, SD card
Device select
YoucandisplayaDeviceselectscreenfor
deviceselection.
1
Touch [ ] in the control screen.
The Device select screen appears.
Device selection
Bluetooth:UsestheAndroidsmartphone
connectedviaBluetoothforanAha
connection.
Wired:UsestheiPhoneconnectedviathe
KCA-iP202(optionalaccessory)foran
Ahaconnection.
NOTE
•Ifyoutouch[ ]whennodevicehasbeen
connected,apopupscreenthatallowsdevice
selectiononlyappears.
•AniPhoneconnectedviaBluetoothcannotbe
usedforanAhaconnection.
•IfthevolumeofAhareceivedbyaBluetooth
deviceistoolow,raiseitontheBluetoothdevice.
Station list screen
Youcanperformthefollowingfunctions
fromthisscreen.
Selects the station
Touchthestationnameinthelist.
NOTE
•YoucannotselectiPodasrearsourcewhen
youselectAhaasmainsourceindualzone
function.
Voice memo
1
Touch [ ] in the control screen.
Status bar
Confirmsthecurrentlocation.
[Start]
Startsrecordingthevoicememo.
[Stop]
Stopsrecordingthevoicememo.
[Send]
Sendstherecordedvoicememo.
[Cancel]
Cancelsthevoicememoandreturnstothe
controlscreen.
NOTE
•ThisfunctionisavailablefromaniPhone(iOS5
orlater)connectedviatheKCA-iP202(optional
accessory).
•ThisfunctionisnotavailablefromanAndroid
deviceconnectedviaBluetooth.
Navigate
Setsthelocationinformationreceivedfrom
Ahaatthedestinationofnavigation.
1
Touch [ ] in the control screen.
[Save]
Savesthelocationinformation.
[Go!]
Setsthelocationinformationatthedestination
andstartsnavigation.