Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
6868 69
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Monitor Screen Setup
YoucanadjustimagequalityiniPodvideo,
picturefile,menuscreen,etc.
1
Press the button instructed in each
diagram when the desired screen is
displayed.
Pressfor1second
Screen Control screen appears.
2
Adjust each item as follows.
Bright / Tint / Color / Contrast / Black /
Sharpness
Adjustseachitem.
Dimmer
Selectdimmermode.
ON:Thedisplayandbuttonsdim.
OFF:Thedisplayandbuttonsdonotdim.
SYNC (Default):Turnsthedimmerfunctionon
oroffwhenthevehiclelight
controlswitchisturnedon
oroff.
NAV-SYNC:Turnsthedimmerfunctiononor
offaccordingtotheNavigation
Day/Nightdisplaysetting.
Mode (Playback screen only)
Selectscreenmode.
Full:Fullpicturemode
Just:Justifypicturemode
Zoom:Zoompicturemode
Normal:Normalpicturemode
NOTE
•Adjustingitemsaredifferentdependingonthe
currentsource.
•Youcanperformthisfunctiononlywhenyou
haveappliedtheparkingbrake.
•Theimagequalitycanbesetforeachsource.
Setting Up
System Setup
NOTE
•Eachoperationinthissectioncanbestartedfrom
themultifunctionmenu.
1
Touch [Menu] on any screen.
TOP Menu screen appears.
2
Touch [SETUP].
3
Touch [System].
System screen appears.
See the following section for each setting.
• Set up the user interface (P.70)
• Adjust touch panel (P.71)
• Set up security (P.72)
• Set up external switch (P.73)
• Set up memory (P.73)
 previous next