Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
66 7
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
Functions Of The Buttons On The Front Panel
1
2
3
4
5
6
7
8
9
11
10
NOTE
•Thepanelsshowninthisguideareexamplesusedtoprovideclearexplanationsoftheoperations.Forthisreason,
theymaybedifferentfromtheactualpanels.
Basic Operations
Number Name Motion
1
fi(Reset) •Iftheunitortheconnectedunitfailstooperateproperly,theunit
returnstofactorysettingswhenthisbuttonispressed(P.99).
2
ATT •Switchesattenuationofthevolumeon/off.
•Pressingfor1secondturnsthescreenoff.
3
∞,5(Vol) Adjustsvolume.
4
AUD •DisplaysGraphicEqualizerscreen(P.86).*
•Pressingfor1secondswitchescameraviewdisplayon/off.
5
NAV •Displaysthenavigationscreen.
•Pressingfor1secondswitchesAVoutsources.
6
MENU •DisplaystheTopMenuscreen(P.13).
•Pressingfor1secondturnsthepoweroff.
•Whenthepoweroff,turnsthepoweron.
7
TEL •DisplaystheHandsFreescreen(P.54).
•Pressingfor1seconddisplaystheScreenControlscreen.
8
0(Eject) •Ejectsthedisc.
•Whenthepanelisopened,pressingclosesthepanelandpressingfor1
secondejectsthediscforcibly.
•Whenthepanelisclosed,pressingfor1secondfullyopensthepanelto
thelocationoftheSDcardslot.
9
Remote
Sensor
•Receivestheremotecontrolsignal.
•YoucanenableordisablethisfeaturebyRemoteSensor(P.70).
•If[RemoteSensor]issettooff,theremotecontrolofTVreceptionis
rejected.
10
Discinsert
slot
Aslottoinsertadiscmedia.
11
SDcardslot AslottoinsertanSDcard.Thecardisusedforupgradingthemap.
Forhowtoupgradethemap,refertotheinstructionmanualofthe
navigationsystem.
Also,youcanplayaudio/visualfileinthecard.
*ThedisplaymaynotswitchtotheGraphicEqualizerscreeninsomeconditions.
 previous next