Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
88 9
Return to the Top page
Basic Operations
Return to the Top page
Basic Operations
Turning On The Unit
Themethodofturningonisdifferentdependingonthemodel.
Press the <MENU> button.
Theunitisturnedon.
To turn off the unit:
Pressthe<MENU>buttonfor1second.
Ifitisyourfirsttimeturningtheunitonafterinstallation,itwillbenecessarytoperform
Initial setup (P.8).
Initial setup
Performthissetupwhenyouusethisunitfirsttimeorwhenyouresettheunit(P.99).
Set each item as follows.
Language
Selectthelanguageusedforthecontrolscreenandsettingitems.Defaultis“BritishEnglish(en)”.
1Touch[SET].
2Touch[2]or[3]toselectthedesiredlanguage.
3Touch[Enter].
Fordetailedoperation,seeLanguage setup (P.71).
1
1
Angle
Adjustthepositionofthemonitor.Defaultis“0”.
1Touch[SET].
2Touchdesiredanglenumberand[
].
Fordetailedoperation,seeMonitor angle control (P.74).
iPod AV Interface Use
SettheterminalwhichyouriPodisconnectedto.Defaultis“iPod”.
1Touch[iPod]or[AV-IN2].
Color
Setthescreenandbuttonilluminationcolor.Youcanselectwhethertoallowcolorscanoperationor
selectafixedcolorforoperation.
1Touch[SET].
2Touch[ON]or[OFF]of[PanelColorScan].
3Ifyouwanttochangecolor,touch[SET]of[PanelColorCoordinate].
4Touchyourdesiredcolorand[
].
Fordetailedoperation,seePanel color coordinate (P.75).
EXT SW
Controltheexternaldevices.
1Touch[SET].
2Setdevicename,outputpattern,andpulsesetfordevice.Then,touch[
].
Fordetailedoperation,seeEXT SW setup (P.73).
Camera
Settheparametersforthecamera.
1Touch[SET].
2Seteachitemandtouch[
].
Fordetailedoperation,seeCamera Setup (P.78).
Touch [Finish].
NOTE
•ThesesettingscanbesetfromtheSETUPmenu.SeeSetting Up (P.68).
2
 previous next