Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
7474 75
Return to the Top page
Setting Up
Return to the Top page
Setting Up
3
Follow the instruction on the screen.
Recall
Recallsthememorizedsettings.
Memory
Memorizesthecurrentsettings.
Clear
Clearsthecurrentlymemorizedsettings.
Cancel
Quitsmemorization/recallingofsettings.
Display Setup
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Display].
Display screen appears.
See the following section for each setting.
• Control monitor angle (P.74)
• Adjust panel color (P.75)
• Changing background image (P.76)
Monitor angle control
Youcanadjustthepositionofthemonitor.
1
Touch [Angle] in the Display Menu
screen.
Angle setup screen appears.
2
Select a below number that
represents your desired angle setting.
Default is “0”.
NOTE
•Youcanstorethecurrentmonitorangleasthe
angleduringpoweroff.Touch[Memory]when
thedesiredangleisselected.
However,thesettingvaluereturnsto“0”ifyou
detachthefrontpanel.
•Thefrontpanelcanbesettoopenautomatically
whentheignitionisturnedoff,sothatitcanbe
detachedforantitheftpurpose.Touch[ON]of
[AutoOpen].
Panel color coordinate
Youcansetthescreenandbutton
illuminationcolor.
Theselectableitemsdifferdependingonthe
unit.
1
Touch [Color] in the Display Menu
screen.
Color screen appears.
2
Touch [SET] of
[Panel Color Coordinate].
Panel Color Coordinate screen appears.
NOTE
•Youcantouch[SET]or[Initialize]when
[PanelColorScan]issettooff.
•Touch[Initialize]toresetthesettingstothe
defaultsettings.
3
Touch the desired color.
Continued
 previous next