Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
9090 91
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
NOTE
•Makefineadjustmentofthedelaytimeofthe
speakeroutputspecifiedheretohaveamore
suitableenvironmentforyourvehicle.
•Ifyouspecifythedistancefromthecenterofthe
currentlysetlisteningpositiontoeveryspeaker,
thedelaytimewillbeautomaticallycomputed
andset.
1
Determinethecenterofthecurrentlyset
listeningpositionasthereferencepoint.
2
Measurethedistancesfromthereference
pointtothespeakers.
3
Calculatethedifferencesbetweenthedistance
ofthefurthestspeakerandotherspeakers.
4
Inputthedifferencescalculatedinstep
3
for
individualspeakers.
5
Adjustgainforindividualspeakers.Asound
imagewillbeshiftedtothespeakerwith
increasedgain.
Example:When[FrontAll]isselectedasthe
listeningposition
50cm
80cm
150cm
+70cm
+0cm
+100cm
Listening Position
Youcanadjustthesoundeffectsaccording
toyourlisteningposition.
1
Touch [Position].
Position screen appears.
2
Select listening position from
[Front R] (Right front), [Front L] (Left
front), [Front All] (All front), and [All]
using [2] and [3].
Position DTA Control
Youcanfine-adjustyourlisteningposition.
1
In Position screen, touch [Adjust].
2
Select the speaker you wish to adjust
by touching speaker icon.
3
Set DTA as follows.
[2], [3]
AdjustthesettingsoftheDTAposition.
Gain
Touchtoadjustthegainofeachspeaker.
Initialize
Initializethesettingvalues.
 previous next