Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
8080 81
Return to the Top page
Setting Up
Return to the Top page
Setting Up
AV Output Interface Setup
YoucanselectanAVsourcetobeoutputat
theAVOUTPUTport.Defaultis“VIDEO1”.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [2] or [3] to set [AV-OUT] to
VIDEO, DISC, TV, iPod, or OFF.
External Device Control
Controltheexternaldevicepowersupply.
1
Touch [EXT SW] in the Source Control
screen.
EXT SW Control screen appears.
NOTE
•If[EXTSW]isnotdisplayed,touch[ ].
2
Touch the desired switch key.
You can turn on or off the external device
power supply.
NOTE
•Youmustconnectacommerciallyavailablerelay
unitinordertousethisfunction.Connectthe
externaldevicetobecontrolledtothatrelayunit.
•SeeEXT SW setup (P.73)forinformationon
settingthepoweronoroffspecification.
 previous next