Kenwood DNX9210BT GPS Receiver User Manual


  Open as PDF
of 58
 
6666 67
Return to the Top page
Camera Control
Return to the Top page
Camera Control
WhenaCMOS-310/CMOS-300(optional
accessory)isconnected,thecameracanbe
controlledfromthisunit.
Switching the View Mode
Camerasystemcandisplay5kindsofview
mode.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
View modes are switched each time you
touch the illustrated area.
Switching the View Camera
Swithingbetweenthefrontviewcameraand
therearviewcamera.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
Switches between the front view camera
and rear view camera each time you
touch the illustrated area.
Camera Control
 previous next