Jaguar XK8 Automobile User Manual


 
CONTROL MODULE PIN OUT INFORMATION
BODY PROCESSOR MODULE
;J Pin
Description
Active
FC14-15
IGNITION SWITCHED GROUND SUPPLY
GROUND
I FC14-32
IGNITION SWITCHED GROUND SUPPLY
GROUND
0 FC14-48
GEARSHIFT lNTERLOCK SOLENOID SUPPLY B- ,GEARSHIFT FREE)
0 FC14~5,
KEY LOCK SOLENOID SUPPLY BL (KEY CAPTIVE,
I FC14-58
NOT-IN-PARK
GROUND iR.N.D.4.3.21
I FC14~80
BAKERY POWER SUPPLY ,LOGlC,
B+
S FC14-84
SCP NETWORK
2 - ,600 HZ
S FC14-85
SW NETWORK
2-1500HZ
I FC14-104
LIGHTING, MOTORS BA”ERY POWER SUPPLY B,
ENGINE CONTROL MODULE
7 Pin
Description
I EM10-10
BRAKE SWITCH
c
EM10~28
CAN NETWORK
c EM,O-27
CAN NETWORK
Active
GROUND
1551500HZ
15-1500Hr
GEAR SELECTOR ILLUMINATION MODULE
;;;i Pin
Description
c FC88-4
CAN NETWORK
c
FC88-3
CAN NETWDRK
c FC88~8
CAN NEWORK
c
FC88-9
CAN NETWORK
MAJOR INSTRUMENT PACK
D Pin
Description
Active
S
FCE-19
SW NETWORK
2-1600H2
S
Fc?S-20
SW NETWORK
2 - ,600 Hz
c FCZ524
CAN NEWORK
15 1500 Hi
c FCZS-47
CAN NETWORK
15 1500 Hz
NOTE: REFER TO THE APPENDIX AT THE REAR OF THIS BOOK FOR CAN AND SCP NETWORK MESSAGES.
Inactive
GROUND
GROUND ,GEARSHlFT LOCKED)
GROUND (KEY RELEASED)
B+ (PARK)
B-
B+
Inactive
53,
Inactive
Inactive
COMPONENTS
Component
Connector I Type I Color
Location / Access
BODY PROCESSOR MODULE
FCld; 704.WAY AMP EEECIGREY
PASSENGER SIDE FASCIA, AIRBAG BRACKET
BRAKE SWITCH
AC24 ! 4~WAY MULTILOCK 070, WHITE
TOP OF BRAKE PEDAL
ENGINE CONTROL MODULE
EM,0 : zsw*\y MULTlLOCK 040, GREY
ENGINE COMPARTMENT i CONTROL MODULE ENCLOSURE
EM,, / IS-WAY MULTILOCK 040 i GREY
EM12 Z-WAY MULTILOCK 040, GREY
EM,3,34-WAY MULTILOCK WI! GREY
EM14 / 12.WAY MULTILOCK /WHITE
EM15 22.WAY M”LTlLOCK47 : WHlTE
GEARSELECTOR lLL”MlNATlDN MODVLE
FC88, IO-WAY MULTILOCK 070 i WHlTE
FRONT OF GEAR SELECTOR ASSEMBLY
GEARSHIFT ,NTERLOCK SOLENOID
FIX?, Z~WAY MVLTILOCK 070 /WHITE
GEAR SELECTOR ASSEMBLY
KEYLOCK SOLENOID iCOLUMN SWlTCHGEARi
SC, II 12.WAY MULTILOCK 070, WHITE
STEERING COLUMN
MA.JOR lNSTR”MENT PACK
FC25 ! 489fvAY AMP PCB SGNAL: BLXK
FASCIA
FC26 i Z&WAY AMP PCB SIGNAL i BLACK
NOT-IN-PARK MICROSWTCH
FC87 : 3.WAY MVLTILOCK 070 ,’ WHITE
GEAR SELECTOR ASSEMBLY
HARNESS-TO-HARNESS CONNECTORS
Connector
Type / Color
Location / Access
AC13
EM,
GROUNDS
Ground
20.WAY MULTILOCK 070 /YELLOW
20.WAY MULTILOCK 070, WHITE
Location / Type
FASC,A BOFFOM CONNECTOR MOUNTING BRACKET, RIGHT HAND SIDE
ENG,NE COMPARTMENT/ADJACENT TO RIGHT HAND ENCLOSURE
FC2BR
EYELET IPAIR) -RIGHT HAND LEG, RIGHT HAND ‘A’ POST
FC3BR
EYELET (PAIR, - RlGHT HAND LEG, TRANSMISSION TUNNEL. LEFT HAND SIDE
FC4BR
EYELET IPAIR) RIGHT HAND LEG, LEFT HAND ‘A’ POST
CONTROL MODULE PIN OUT INFORMATION (FOLD OUT PAGEI
t-
The following symbols are used to represent values for Control Module Pin Out data:
I
Input
D
Serial and encoded communications
B+ Battery voltage
KHz Frequency x 1000
0 output
C
CAN (Network) V Voltage (DC)
MS Milliseconds
SG Signal Ground
S
SCP Network Hz Frequency
MV Millivolts
CAUTION: The information on this data page is furnished to aid the user in understanding circuit operation. THIS INFORMATION SHOULD BE USED FOR
REFERENCE ONLY.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit connections made and all
components connected and fitted. “Active” means a load is applied or a switch is ON; “Inactive” means a load is not applied or a switch is OFF.
REFER TO THE FRONT OF THE BOOK FOR ILLUSTRATIONS DETAILING THE LOCATION AND IDENTlFlCATlON OF COMPONENTS, RELAYS,
CONNECTORS, HARNESSES, GROUNDS, VEHICLE CONTROL MODULES AND CONTROL MODULE PINS.
DATE OF ISSUE: FEBRUARY 1998