Filter
Top Products
GPSMAP 4000 Series Owner’s Manual 33
VIeWInG InformatIon
VIeWInG
I
nformatIon
Viewing Gauges
Use the Gauges screen to view engine gauges in an analog or digital.
NOTE: You must be connected to a NMEA 2000 network capable of sensing engine data to view
the gauges. For more information on supported NMEA 2000 PGN information, see page 67.
To select analog or digital gauges:
1. To view the Gauges from the Home screen, select Information > Gauges.
2. To select analog or digital gauges, select Menu from the Gauges screen.
Select Gauge Setup to select the number of engines (1 - 4), number of fuel tanks (1 or 2), and to
reset the odometer to zero.
NOTE: For more than two engines, you can only use the digital gauges. For one or two engines,
you can switch between analog and digital gauges.