Filter
Top Products
26 GPSMAP 4000 Series Owner’s Manual
uSInG Where to
Where to
To mark your current location as a waypoint:
1. At any time, press the MARK key.
2. Select Edit Waypoint to designate a specic name, symbol, water depth, water temperature,
or position. Select Back or Home to return to the Home screen.
NOTE: Selecting Mark only creates a waypoint at your present location.
To mark an MOB (Man Overboard) location:
When you mark a waypoint, you can designate it as an MOB (Man Overboard). This marks the
point and sets a course back to the marked location. When an MOB is active, an MOB waypoint
with an international MOB symbol is created, and the unit is on an active navigation to that point.
1. At any time, press the MARK key.
2. Select Man Overboard.
To edit an existing waypoint:
1. From the Navigation chart, press the ROCKER and use the map pointer ( ) to highlight the
waypoint on the navigation chart.
OR
From the Home screen, select Information > User Data > Waypoints.
2. Select the button for the waypoint you want to edit.
4. Select Edit Waypoint.
5. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water Temp, or
Position).
To move the waypoint on the navigation chart:
1. Select the waypoint on the navigation chart.
2. Select Review.
3. Select the button for the waypoint you want to edit.
4. Select Edit Waypoint.
5. Select Position.
6. Select Use Chart or Enter Coordinates.
7. If entering coordinates, use the ROCKER or NUMERIC KEYPAD (4012/4212 only) to enter
the new coordinates for the waypoint. If using the chart, highlight the new location with the
map pointer ( ), and select Move Waypoint. The waypoint moves to the new location.