Filter
Top Products
4 GPSMAP 4000 Series Owner’s Manual
GettInG Started
GettInG
started
Inserting and Removing SD Cards
Your unit supports Secure Digital (SD) cards. Insert optional BlueChart
®
g2 Vision
™
SD cards to
view high-resolution satellite imagery, and aerial reference photos of ports, harbors, marinas, and
other points of interest. Insert blank SD cards to transfer data such as waypoints, routes, and tracks
to another compatible Garmin unit or a PC. The SD card slot is located on the bottom-right corner of
the unit.
To insert the SD card, open the access door and press the SD card in until it clicks.
Card label
GPSMAP 4012 or 4212
Card label
GPSMAP 4008 or 4208
To remove the SD card, press in on the SD card. The card pops out.
For more information on BlueChart g2 Vision, see page 14.
For more information on transferring data, see page 31.
System Settings
The following paragraphs describe how to view system information, restore factory settings, and use
the simulator mode. For a more detailed description of system settings, refer to page 35.
Restoring Factory Settings
You can restore your unit to the original factory settings.
CAUTION: This procedure deletes any information you have entered.
To restore factory settings:
1. From the Home screen, select Congure > System > System Information.
2. Select Factory Settings.
3. Select Reset to restore all factory settings. Otherwise, select No to cancel.