Filter
Top Products
GPSMAP 4000 Series Owner’s Manual 23
uSInG Where to
Where to
usInG Where to
Use the Where To option on the Home screen to search for and navigate to nearby fuel, repairs, and
other services, as well as waypoints and routes.
NOTE: You must create waypoints and routes before you can navigate to them.
You can navigate to a destination using one of three methods: Go To, Route To, or Guide To.
Go To—takes you directly to the destination.
Route To—creates a route from your location to a destination, allowing you to add turns to
the route.
Guide To—searches BlueChart g2 Vision chart data to suggest the best path to your
destination. You must be using a BlueChart g2 Vision SD card for this option to appear.
CAUTION: Guide To does not assure obstacle and bottom clearance. For safety, always resolve any
discrepancies or questions before continuing navigation.
Navigating to a Destination
You can search for, and navigate to, nearby destinations including fuel, repairs, marinas, waypoints,
and routes.
To begin navigating:
1. From the Home screen, select Where To.
2. Select the marine service category to which you want to navigate. The unit shows the list of
the 50 nearest locations and the distance to each.
3. Select the marine service item to which you want to navigate. A screen containing information
about the selected marine service appears.
•
•
•