Filter
Top Products
66
eTrex Vista C
Welcome Page Setup
The Welcome Page Setup Page allows you to insert a message on the
Welcome Page (the first page to display when you turn the unit on).
1. Access the Welcome Page Setup Page.
2. Use the keypad at the base of the screen to enter your welcome
message. Use the ROCKER key to move between characters
and press ENTER to select them.
3. When fi nished, highlight “OK” on the keypad and press ENTER
to close.
GPS Navigation
Use the elevation deter-
mined by the GPS receiver
Calibration Complete
Press ENTER
Calibration Failed
Press ENTER and retry
Altimeter Setup
Allow the GPS Receiver to deter-
mine the elevation: the GPS receiver
estimates the current elevation when
determining its location. The accur-
racy will vary depending on the posi-
tion (telemetry) of satellites overhead.
It won’t be as accurate as an elevation
entered from a known source, but is
suffi cient for most navigation applica-
tions.
2. When fi nished, a Completed or Failed
message appears.
Welcome Page Setup
Text and
Number
Keypad
eTrex Vista C Owner's Manual Text.indd 66 8/12/2004, 9:17:47 AM