Filter
Top Products
7. OTHER FUNCTIONS
44
SAVING START?
(PC READY?)
ARE YOU SURE?
YES NO
SAVING START? prompt
5. Set up the computer to receive data.
6. Press ◄ to choose YES and then press
the [ENT] key to download.
SAVING
COMPLETED
HIT ANY KEY.
WPTS & ROUTES
SAVING ...
CANCEL?
Data is being
saved. To can-
cel, press the
[ENT] key.
Saving is
completed.
Hit any key
to escape.
Downloading sequence
7. Press any key to escape.
Uploading data from a PC
Note that all waypoint and route data stored
in the GP-37/GP-32 will be deleted when data
is uploaded.
1. Press the [MENU] key once or twice to
open the menu, choose I/O SETUP and
then press the [ENT] key.
2. Choose LOAD WPT/RTE ← PC?.
3. Press the [ENT] key.
LOAD WPT/RTE
LOADING ERASES CUR-
RENT WPT/RTE DATA.
SET PC PORT TO 4800
8 BIT, P-N, S1, XON/OFF.
CONTINUE?
LOAD WP/RTE display
4. Press the [ENT] key.
LOADING START?
(PC READY?)
ARE YOU SURE?
YES NO
LOADING START? prompt
5. Set up the computer to output data.
6. Press ◄ to choose YES and then press
the [ENT] key to upload.
Note: The waypoint and route data are
deleted when the [ENT] key is pressed.
WPTS & ROUTES
LOADING....
CANCEL?
Now loading
data
To cancel, press
[ENT] key.
Message when data is being loaded
7. When the loading is completed, the
following message appears.
LOADING
COMPLETED.
HIT ANY KEY.
Message when data is loaded successfully
8. Press any key to escape.
Loading data from a YEOMAN
Waypoint data from a YEOMAN has the
same format as does the NMEA 0183 data
sentence WPL.
1. Press the [MENU] key twice, choose I/O
SETUP and then press the [ENT] key.
2. Choose LOAD WPT ← YEOMAN?.
3. Press the [ENT] key.
LOAD YEOMAN WPT
LOADING YEOMAN WPT
DATA.
CONTINUE?
LOAD YEOMAN WP display