Filter
Top Products
7. OTHER FUNCTIONS
41
DISABLE GEO
Like GPS satellites, the GPS receiver
automatically eliminates any malfunctioning
WAAS satellite. To disable a WAAS satellite
manually, enter three-digit satellite number
with the cursor pad and then press the [ENT]
key. To restore a satellite, enter “000”.
FIX MODE
Chooses position fixing method; 2D or 2/3D.
2D requires three satellites in view of the
GPS receiver; 2/3D requires three or four
satellites in view of the GPS receiver,
whichever is available. When the 2D mode is
selected, enter the antenna height above the
waterline, to obtain accurate position data.
The default setting is 5 m.
7.11 User Display Setup
The user displays, which appear when the
[DISP] key is pressed several times, provide
user-customized digital data and a
speedometer.
Digital data
The user may choose 1-4 items of navigation
data to display on the digital display.
1. Press the [MENU] key once or twice to
open the menu.
2. Choose USER DISP and then press the
[ENT] key.
USER DISPLAY
1: DIGITAL
2: SPEEDOMETER
USER DISPLAY menu
3. Choose 1 or 2 and then press the [ENT]
key.
OFF
DIGITAL
SPEEDOMETER
User display type options
4. Choose DIGITAL and then press the
[ENT] key.
5. The cursor is selecting the square at the
right side of the screen. Press the [ENT]
key.
: 1 indication
: 2 indications
: 3 indications
: 4 indications
User display screen division options
6. Choose the screen division desired, that
is, the number of data to display, and then
press the [ENT] key. The display now
looks something like the one shown
below.
USER DISPLAY
A: POWER
B: TRIP
C: SOG
D: COG
A
A
B
C
D
A
B C
*
*
= Changes according to selection at step 6.
A
B
USER DISPLAY menu,
default digital display settings
7. “A” is selected. Press the [ENT] key.
NONE ODO TRIP
TIME POSN POWER
SOG COG WPT
XTE TTG ETA
Digital data options