Filter
Top Products
4. ROUTES
24
Permanently deleting a waypoint from
a route
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ROUTES and then press the
[ENT] key.
3. Choose the route desired.
4. Press the [ENT] key.
5. Choose the waypoint you want to delete.
6. Press the [ENT] key.
7. Choose “REMOVE?.”
8. Press the [ENT] key.
9. Press the [MENU] key twice to finish.
Inserting a waypoint in a route
To insert a waypoint in a route, do the
following:
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ROUTES and then press the
[ENT] key.
3. Choose the route desired.
4. Press the [ENT] key.
5. Choose the waypoint which will come
after the waypoint to be inserted. In the
illustration below, for example, if you want
to insert the waypoint between KOBE and
001, choose 001.
ROUTE-01
Exit?
CMNT: KOBE → OSAKA
TOTAL DISTANCE 21.0nm
01. KOBE
02. 001
03. OSAKA
04. _ _ _ _ _ _
05. _ _ _ _ _ _
10.2nm 180°
9.8 nm 90°
Route contents (Route-01)
6. Press the [ENT] key.
7. Choose “INSERT?.”
8. Press the [ENT] key.
9. Use the cursor pad to enter waypoint.
10. Press the [ENT] key.
11. Press the [MENU] key twice to finish.
Temporarily deselecting a waypoint in
a route
You can temporarily deselect an unnecessary
waypoint from a route. Using the route
created in the illustration at the top of the next
column as an example, deselect the 2nd
intermediate waypoint.
Intermediate Point 2
(WPT 002)
[ROUTE 01]
KOBE
(Starting point)
Intermediate Point 1
(WPT 001)
Intermediate Point 1
(WPT 003)
OSAKA
(Arrival point)
Sample route
If you reconstruct the route without the 2nd
intermediate point it would look like the
illustration below.
WPT 002
SKIP "002"
WPT 001
KOBE
WPT 003
OSAKA
Reconstruction of sample route above without
the 2
nd
intermediate waypoint
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ROUTES and then press the
[ENT] key.
3. Choose route desired and then press the
[ENT] key.
4. Place the cursor on the waypoint to skip.
5. Press the [ENT] key.
6. Choose “SKIP?” and then press the [ENT]
key. “X” appears to the left of the waypoint
skipped as shown in the illustration below.
ROUTE-01
Exit?
CMNT: KOBE → OSAKA
TOTAL DISTANCE 21.0nm
01. KOBE
x 02. 001
03. OSAKA
04. _ _ _ _ _ _
05. _ _ _ _ _ _
10.2nm 180°
9.8 nm 90°
Skipped
waypoint
Route contents (Route-01)