Filter
Top Products
2. PLOTTER DISPLAY OVERVIEW
10
Cursor turned off
The cursor is erased when there is no cursor
pad operation for about six seconds. Ship’s
position, speed and course appear when the
cursor is off.
D2D
[ 40 ]
n
m
COG:
7°
SOG:
9.0
k
t
34°44.111N 135°20.555E
Own ship's position in
latitude and longitude
Own ship's position
(Blinking)
Course over ground
Speed
over
ground
Plotter display, cursor turned off
2.3 Shifting the Display
The display can be shifted on the plotter
display. Operate the cursor pad to place the
cursor at an edge of the screen. The display
shifts in the direction opposite to cursor pad
operation.
2.4 Centering Own Ship’s
Position
When own ship tracks off the plotter display,
the own ship mark is automatically returned
to the screen center. You can also return it
manually as follows:
1. Press the [MENU] key.
2. Choose “SHIP TO CENTER?”.
3. Press the [ENT] key.
2.5 Changing Track Plotting
Interval, Stopping Plotting
To trace the ship’s track, the ship’s position is
stored into the memory at an interval of
distance or according to display range. For
distance, a shorter interval provides better
reconstruction of the track, but the storage
time of the track is reduced. When the track
memory becomes full, the oldest track is
erased to make room for the latest.
1. Press the [MENU] key once or twice to
display the menu.
2. Choose PLOTTER.
3. Press the [ENT] key.
PLOTTER SETUP
TRACK REC : DISTANCE
INTERVAL : 0.10 nm
BRG. REF. : MAG
MAG. VAR. : AUTO E16
WPT NAME : DSP GOTO
TTG/ETA SPD : AUTO
TRACK MEMORY USED 1%
PLOTTER SETUP menu
4. The cursor is selecting TRACK REC.
Press the [ENT] key to show the track
recording method options.
OFF
DISTANCE
AUTO
Track recording method options
5. Choose OFF, DISTANCE or AUTO and
then press the [ENT] key.
OFF: Track is neither recorded nor
plotted. This setting is useful when you do
not need to record track, for example,
when returning to port.
DISTANCE: Track is recorded and
plotted at the distance interval set.
AUTO: Plotting and recording interval
changes with display range selected.