Filter
Top Products
4. ROUTES
20
4. If necessary, change waypoint, position,
mark shape, and comment (date and
time).
5. Choose “LOG RTE?” and then press the
[ENT] key.
6. Repeat steps 1 through 5 to complete the
route.
7. When you have entered all the waypoint
positions desired, press the [MENU] key
twice, choose ROUTES and then press
the [ENT] key.
ROUTES
VOYAGE ROUTE: STOP
INTERVAL: TIME 00H10M
NO [NEW?]
LOG 001
003
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ROUTES menu
8. “LOG” shows the first and last waypoints
entered for the log route you are currently
creating. Choose LOG and then press the
[ENT] key.
EDIT?
MOVE?
Route processing options
9. “MOVE?” is selected; press the [ENT] key.
The route is moved from “LOG” and is
registered under the next sequential route
number. (To edit the route before saving it,
choose ”EDIT?”. For how to edit a route,
see paragraph 4.2.)
Creating a route from the route menu
The procedure which follows describes how
to create a route from two preregistered
waypoints, KOBE and OSAKA.
1. Press the [MENU] key once or twice to
display the menu.
2. Choose ROUTES.
3. Press the [ENT] key.
ROUTES
VOYAGE ROUTE: STOP
INTERVAL: TIME 00H1M
NO [NEW?]
LOG EMPTY ROUTE
01 001 → 003
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
ROUTES list
4. “NEW?” is selected; press the [ENT] key.
The screen shown below appears.
ROUTE-01
CMNT: EMPTY ROUTE
TOTAL DISTANCE _ _ _ _ nm
01. _ _ _ _ _ _
02. _ _ _ _ _ _
03. _ _ _ _ _ _
04. _ _ _ _ _ _
05. _ _ _ _ _ _
Exit?
_ _ _ _ nm _ _ _°
_ _ _ _ nm _ _ _°
_ _ _ _ nm _ _ _°
_ _ _ _ nm _ _ _°
Screen for entering route by waypoint
5. Choose location (01, etc.) and then press
the [ENT] key. Use ▲ or ▼ to display
waypoint name. (In the example, KOBE.)
6. Press the [ENT] key.
7. Repeat steps 5 and 6 until you have
entered all waypoints desired.
Note: If you enter a waypoint which has
not been registered, your screen will show
a message which looks something like the
one below. Press ◄ to choose YES and
then press the [ENT] key to create a new
waypoint; choose NO to return to the
route entry screen.
NEW WPT NAME.
CREATE 008?
ARE YOU SURE?
YES NO
New waypoint creation screen
When you choose YES, the following
screen appears. Edit the waypoint as
necessary, choose “Exit?” and then press
the [ENT] key.