Filter
Top Products
5. DESTINATION
28
5.3 Setting Route as
Destination
1. Press the [GOTO] key.
2. Choose “ROUTE?”.
3. Press the [ENT] key.
SELECT GOTO ROUTE
NO [NEW?]
LOG EMPTY ROUTE
01 017 021
02 OSAKA KOBE
03 EIMI KIMI
04 BOSTON
GOTO ROUTE list
4. Choose a route.
5. Press the [ENT] key. The following
options window appears.
FORWARD?
REVERSE?
Route following direction options
6. Choose “FORWARD?” or “REVERSE?”,
the order in which to traverse the route
waypoints, and then press the [ENT] key.
Intermediate Point 2
(WPT 002)
[ROUTE 01]
KOBE
(Starting point)
Intermediate Point 1
(WPT 001)
Intermediate Point 1
(WPT 003)
OSAKA
(Arrival point)
FORWARD
REVERSE
Meaning of forward and reverse
Current position becomes the starting point. A
dashed line runs between the starting point
and all route waypoints. Next destination
waypoint is shown in reverse video.
The destination waypoint is automatically
switched when the boat enters the arrival
alarm range or the boat passes an imaginary
perpendicular line passing through the center
of the destination waypoint. For how to set
the arrival alarm, see paragraph 6.1.
5.4 Setting User Waypoint as
Destination
You may place a desired waypoint in the
GOTO options window and use it to set
destination.
Choosing user waypoint
1. Press the [GOTO] key.
2. Choose “SETUP?” and then press the
[ENT] key.
SELECT USER WPT
[NEW?] 001 002
003 004 005
006 007 008
CURSOR KOBE MOB
OSAKA START _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
SELECT USER WPT list
3. Choose waypoint desired and then press
the [ENT] key. The GOTO window
appears, showing the waypoint selected
as below.
GOTO
WPT-LIST? 001
WPT-NEAR? OFF??
ROUTE?
CURSOR? SETUP?
Location of
user waypoint
(Example: 001)
GOTO options
4. Choose user waypoint and then press the
[ENT] key.
A dashed line connects own ship and the
waypoint selected, which is shown in reverse
video.
5.5 Canceling Destination
You can cancel destination as follows:
1. Press the [GOTO] key.
2. Choose “OFF?”.
3. Press the [ENT] key.