Filter
Top Products
-1.58-
1.38 Adjusting Brilliance of Screen Data
You can adjust relative brilliance levels of various marks and alphanumeric readouts displayed on
the screen by the steps below:
1. Press the RADAR MENU key to show the FUNCTIONS 1 menu.
2. Press the [0] and [9] key to show the BRILLIANCE 1 menu. To display the BRILLIANCE 2
menu, further press the [9] key.
3. Select a desired menu item by pressing the corresponding numeric key. As an example, press
[8] in the BRILLIANCE menu if you want to change the brilliance of target trails.
4. Further press the same numeric key as you pressed in step 3 above to select or highlight a
desired brilliance level.
5. Press the ENTER key to conclude your selection followed by the RADAR MENU key to
close the FUNCTIONS menu.
RADAR MENU
[0]
[9]
[BRILLIANCE 1]
1 [FUNCTIONS 2]
2 RINGS BRILL OFF/DIM/M1/M2/BRT
3 EBL BRILL DIM/M1/M2/BRT
4 VRM BRILL DIM/M1/M2/BRT
5 +CURSOR BRILL OFF/DIM/M1/M2/BRT
6 CHAR BRILL DIM/M1/M2/BRT
7 MARK BRIL DIM/M1/M2/BRT
8 TRAIL BRILL DIM/M1/M2/BRT
9 HL BRILL DIM/M/BRT
0 [BRILLIANCE 2]
[BRILLIANCE 2]
1 [BRILLIANCE 1]
2 PLOT BRILL OFF/DIM/M1/M2/BRT
3 L/L GRID BRILL DIM/M1/M2/BRT
4 CHART BRILL DIM/M1/M2/BRT
5 SYMBOLS BRILL DIM/M1/M2/BRT
[0]
[FUNCTIONS 1]
1 TARGET TRAILS
2 TARGET ALARM 1 or 2
3 ORIGIN MARK 1 to 10
4 INDEX LINES
5
6 PULSE WIDTH
7 INT REJECT
8 ARPA
9 VIDEO PLOT
0 [FUNCTIONS 2]
[FUNCTIONS 2]
1 [FUNCTIONS 1]
2 BKGD COLOR
BLK (GRN CHAR)/
BLK (RED CHAR)/
BLU (ECHO AREA)
BLU/
BRT BLU
3 ECHO STRETCH OFF/1/2/3
4 ECHO AVERAGE OFF/1/2/3
5 ECHO COLOR YEL/GRN/COLOR*
6 SHIP SPEED LOG/NAV*/MAN
MAN = xx.xKT
(STW/SOG)
7 SET, DRIFT OFF/MAN
SET = xxx.x°
DRIFT=xx.xKT
8 INDEX LINES NO.2 VRM/MAN
MAN = xx.xx NM
9 BRILLIANCE (1)
0 [FUNCTIONS 3]