Filter
Top Products
-1.
8-
DATA DISPLAY
HDG 155.0 T
SPEED 12.0KT BT LOG
ARPA AUTO+MAN
TRUE VEC 6MIN GRD STAB
HISTORY 6MIN
RNG 4.7NM
BRG 25.5 T
CSE 264.0 T BT TRU
OWN SHIP [GP]
34 40.849N
125 18.115E
+CURSOR POSN
34 39.039N
135 18.303E
11.7NM
162.5 T
WPT 2 150.8NM
155.0 T
DEPTH 21.1m
CURRENT
2.2KT
105.7 T
WIND
11.3KT
285.6 T
12 MAR 1998 13:28 LOCAL
... SIGNAL MISSING ...
GYRO LOG EPFS TRIGGER
VIDEO AZIMUTH HEAD LINE
.... ARPA ALARM ....
COLLISION GUARD LOST
TARGET FULL (AUTO + MAN)
01
SPD 12.3KT BT TRU
CPA 3.4NM
TCPA 94MIN
BCR 2.9NM
BCT 94NM
RNG 2.0NM
BRG 180.0 T
CSE 200.0 T BT TRU
02
SPD 10.5KT BT TRU
CPA 1.3NM
TCPA 15.1MIN
BCR 3.0NM
BCT 25NM
RNG 2.0NM
BRG 180.0 T
CSE 200.0 T BT TRU
03
SPD 10.5KT BT TRU
CPA 1.3NM
TCPA 15.1MIN
BCR 3.0NM
BCT 25NM
1:23
01
HDG: Heading T (True = corrected gyro or magnetic heading)
Speed data is LOG, MAN etc. showing sensor and types.
When set/drift is manually applied, BT appears instead of WT.
(WT: Water tracking mode, BT: Bottom Tracking mode)
SEA STAB: Sea stabilization, displayed objects subject to water,
current.
GND STAB: Ground stabilization, compensated for the current;
stationary objects appear stationary on the display.
Target NO. 01 - 40 in ARPA, 01 - 10 in EPA, automatically assigned.
The numbers are left occupied if targets are lost or intentionally
removed until the full numbers are used up.
Interpreting Course Ex. 180.0 T BT TRU
T: True, referenced to True North
BT: Bottom tracking (referenced on the bottom)
TRU: Vector orientation
Numerals on division lines Ex. 1:23: Elapsed time since last plot (EPA
only)
This third target data area may be used to indicate the graphics of wind
and depth data if the third target data is not interested.
This display cell shows digital readouts of water depth, ocean currents,
wind if associated sensors are in use.
Bearing and range to waypoint
Bearing and range from origin mark to cursor.
Electronic Position-Fixing System, such as GPS, DGPS, DECCA,
LORAN C. Status (Healthy or invalid) will be indicated.
Date and time.
Warning and indications
*Note: When a presentation mode other than north-up true motion is
selected in true vector mode, TRUE VEC indication appears in
red to alert you.
*