Filter
Top Products
-4.9-
Line change feature
The line change allows you to change line type, or to inscribe a separate line. For example,
you want to quit making nav lines and start making a coastline.
1. Press the [MARK] key to open the ENTER MARK menu.
2. Enter 21 to select LINE CHANGE.
3. Enter line no. desired.
4. Enter line.
Erasing marks/lines
When the mark memory becomes full no marks can entered unless you erase unnecessary
marks.
Erasing individual marks
1. Press the [MARK key to open the ENTER MARK menu.
2. Enter 22 (MARK CANCEL).
3. Operate the trackball to place the cursor on the mark you want to erase.
4. Press [ENTER].
Erasing all marks and all lines
1. Press [NAV MENU] and [9] key in order.
2. Press [4] key twice to select MARK OFF followed by [ENTER].
Erasing lines
1. Press the [MARK] key to open the mark menu.
2. Enter 22 for MARK CANCEL.
3. Operate the trackball to place the cursor on the starting or end point of the line you want to
erase. Selecting the intersection of two lines, erasing both lines.
4. Press the [ENTER] key.
4.7 Waypoints
Entering Waypoints
Maximum 98 waypoints, NO. 01- 98, can be entered by the trackball, by latitude and
longitude, or at own ship position.
1. Press [NAV MENU], [4] and [2] key. The following display appears.