Filter
Top Products
-4.13-
Nav Line List
Press [NAV MENU], [4] and [6] to display the list.
Deleting individual navigation lines
1. Press [NAV MENU], [4], [6] and [9].
2. Enter navigation line number you want to delete. (The line in use is not deleted.)
3. Press [ENTER].
Deleting all navigation lines
1. Press [NAV MENU] and [9].
2. Press [6] twice to select ALL.
3. Press [ENTER].
Displaying Navigation Lines
Navigation lines may be set up as follows:
1. Press [NAV MENU] and [3].
2. Press [2] to select NAV LINE.
3. If ON is not in reverse video, press [2] again.
4. Press [ENTER].
[NAVLINE]
1 [NAV INFORMATION 1]
2 NAV LINE OFF/ON
3 NAV LINE NO. xx/xx/xx/xx/xx
4 NAV WIDTH OFF/ON
x.xxNM
5
6 WPT xx
(x) →• →xx→
(xx) → (xx)
7 NAVLINE DATA VIDEO PLOTTER/NAVAID
8 ARRIVAL ALARM OFF/ON
x.xxNM
9
VIDEO PLOTTER selected at 7 WPT DATA NAVAID selected at 7 WPT DATA
5. Press [7] to choose NAV LINE DATA; VIDEO PLOTTER for internally generated
navigation width data or NAVAID for external navaid generated data.
6. Press [ENTER].
7. Press the [3] key, enter in two digits the nav line no(s). (five max.) to display and press
[ENTER]. (To erase a nav line press [3], enter 00 at location of nav line no. on the menu
and press [ENTER].
[NAV LINE]
1 [NAV INFORMATION]
2 NAV LINE OFF/ON
3
4 NAV WIDTH OFF/ON
x.xxxNM
5 WPT NO. OFF/ON
6
7
8 ARRIVAL ALARM OFF/ALL
x.xxNM
9 TURNING LINE OFF/ON/REVISED