Filter
Top Products
Windshield Wipers
You
control the windshield
wipers by turning the band
with the wiper symbol on it.
For
a
single wiping cycle, turn the band to MIST. Hold
it
there until the wipers start, then let go. The wipers will
stop after one cycle.
If
you want more cycles, hold the
band
on
MIST longer.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow. Turn the band to choose the delay time. The
closer to
LO,
the shorter the delay.
For steady wiping at low speed, turn the band away
from you to the
LO
position. For high speed wiping,
turn the band further, to HI. To stop the wipers, move
the band to OFF.
Be sure to clear ice and snow from the wiper blades
before using them.
If
they’re frozen to the windshield,
carefully loosen or thaw them. If your blades
do
become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wipers.
A
circuit
breaker will stop them until the motor cools. Clear away
snow or ice to prevent an overload.
2-41