Filter
Top Products
Manual Bi-Level
Manual Cooling
BI-LEVEL can heat or cool outside air and direct it in
two directions.
Press the arrows on the TEMP SET switch to set a
comfortable temperature. Press VENT and, if you don’t
like the automatic setting, press the arrows on the fan
speed switch.
Manual Ventilation
For mild outside temperatures, when little heating or
cooling is needed, you can still direct outside air through
your vehicle.
Press the arrows on the TEMP SET switch to set a
comfortable temperature. For ventilation, the system
can’t cool the vehicle below the outside temperature.
Press VENT and, if you don’t like the automatic setting,
press the arrows on the fan speed switch.
The air conditioner works best if you keep your
windows closed.
On
very hot days: open the windows
just long enough for the hot air to escape.
Press the arrows
on
the TEMP
SET
switch to set a
comfortable temperature. Press RECIRCULATE. After
cool-down, adjust the airflow to another setting. The
compressor works in all settings except
VENT
and
HEATER and at all temperatures above freezing.
Press the arrows on the fan speed switch
if
you don’t
like the automatic setting. In
AUTO
FAN
on hot days,
the fan speed will be low at first to help get rid
of
the
hot inside air.
When the air conditioner is on, you may notice slight
changes in your vehicle’s engine speed and power. This
is normal because the system is designed to cycle the
compressor on and off to keep the desired temperature
and help fuel economy.
3-7