Filter
Top Products
To Play
a Compact Disc
Don’t use the mini-discs (three-inch singles). They will
eject, but they won’t play. Use only full-size compact
discs.
With the audio system on, insert a disc into the slot with
the label side up. CD will appear on the display and
track
1
will begin to play.
If
both a tape and a compact
disc are loaded into the system, press CA/CD to select
the one you want.
If the disc comes back out and
ERR
appears on the
display, it could be that:
The disc is upside down.
0
It is dirty, scratched, or wet.
0
There’s too much moisture in the air. (Wait about an
hour and try again.)
0
You are driving on a very rough road.
1
0
The temperature is too hot or too cold.
RCL:
Press this button to see what track is playing.
Press it again within five seconds to see how long it has
been playing, the elapsed time
(EL
TIME).
REV:
Press and hold this button to return to a
previously played passage rapidly. The decreasing
elapsed time will show on the display.
FF:
Press and hold this button to fast forward or
advance through passages. The increasing elapsed time
will show on the display.
REPT
Press this button to go to the beginning
of
the
current track after eight seconds or more of play. After
eight seconds or less of play, the player will return to the
beginning of the previous track.
SRCH:
Press this button to go to the beginning
of
the
next track.
SCAN:
Press this button to listen to the first eight
seconds of each track. Press it again to stop scanning.
COMP:
Press this button to make loud and soft
passages more nearly equal in volume. Press it again for
normal play.