Filter
Top Products
Defogging
and
Defrosting Windows
Your vehicle has several settings for clearing your
windows. The air conditioner compressor will run to
help remove moisture from the air.
To
defrost the windshield quickly, press the arrows on
the
TEMP
SET switch to set a comfortable temperature.
Press DEFROST and the fan will go to high speed. After
the windows are clear, you can lower the speed using the
downward arrow or
AUTO
FAN.
With the automatic system, to warm passengers while
keeping
the windshield clear? press the arrows on the
TEMP
SET
switch to set a comfortable temperature. Press
HEATER
and DEFROST at
the
same time and,
if
you
don’t like the automatic setting, press the
arrows
on the fan
speed
switch.
To
defrost the side windows quickly, press the arrows on
the
TEMP
SET switch to set a comfortable temperature.
Then press DEFROST and,
if
you don’t like the automatic
setting, press the arrows on the fan speed switch.
System Problems
If the light above an air control button flashes when you
turn
on the ignition, your system may have an electrical
problem. The flashing will continue for one minute, then
stop.
The flashing light could also mean the refrigerant level
is too low in your system. The light will continue to
flash, even if refrigerant is added, until the system is
reset. Have your system checked and serviced if needed.
To reset your system:
1.
Turn your ignition key to
OFF
or LOCK.
2.
Remove the courtesy lamps and radio fuses from the
main fuse panel and wait one minute. See “Fuses and
Circuit Breakers” in the Index.
3.
Put the fuses back in and start your vehicle.
The light shouldn’t come on and your system should be
working properly. If you still have a problem, see your
dealer.