Filter
Top Products
A
green arrow on the instrument panel will flash in the
direction
of
the turn or lane change.
To
signal
a
lane change, just raise or lower the lever
until the green arrow starts to flash. Hold it there until
you complete your lane change. The lever will return by
itself when you release it.
As
you signal a turn or a lane change, if the arrows don’t
flash but just stay on, a signal bulb may be’burned out
and other drivers won’t see your turn signal.
If
a bulb is burned out, replace it to help avoid an
accident. If the green arrows don’t go on at all when you
signal a turn, check the fuse (see “Fuses” in the Index)
and
for burned-out bulbs.
Headlamp
HighLow
Beam
P
1
1
To
change the headlamps from low beam to high
or
high
to low, pull the turn signal lever all the way toward you.
Then release it. When the high beams are
on,
this
blue
light
on
the instrument panel also will be on.
2-40