Filter
Top Products
To Play a Cassette Tape
Your tape player is built to work best with tapes that are
30
to
45
minutes long on each side. Tapes longer than
that are
so
thin they may not work well in this player.
The longer side with the tape visible goes in first. If you
hear nothing or hear just a garbled sound, it may not be
in squarely. Press EJCT to remove the tape and start
over.
Once the tape is playing, use the knobs for volume and
fade, just as you do for radio. If both a tape and a
compact disc are loaded into the system, press CAKD
to
select the one you want.
REV:
Press this button to return to a previously played
passage rapidly. Press it again to play the passage. The
radio will play while the tape is rewinding.
FF:
Press this button to fast forward or advance the tape
rapidly. Press it again
to
play. The radio will play while
the tape
is
advancing.
REPT
Press this button to go to the beginning of the
current selection after ten seconds or more of play. After
five seconds or less of play, the player will return
to
the
beginning of the previous selection.
SRCH:
Press this button to go to the beginning
of
the
next selection.
SCAN:
Press this button to listen to the first eight
seconds of each passage. Press it again to stop scanning.
PROG:
Press the upper knob to change the side of the
tape that is playing. The lighted arrows show which side
is currently playing.
E
JCT
Press this button to remove the tape.
STOP-PLAY:
Press this button to listen to the radio
without ejecting the cassette tape. Press it again to go
back to the tape.
CrO2:
Press this button when playing high-bias chrome
or metal tapes.
3-15