Filter
Top Products
If
a bulb is burned out, replace it to help avoid an
accident.
If
the arrows don’t go on at
all
when
you
signal a
turn,
check the fuse (see “Fuses and Circuit
Breakers” in the Index) and for burned-out bulbs.
lbrn Signal On Chime
If
your
turn
signal is left on for more than
3/4
of
a
mile
(1.2
h),
a chime will sound at each flash of the turn
signal. To
turn
off the chime, move the
turn
signal lever
to the
off
position.
Headlamp
HigldLow
Beam Changer
To change the headlamps
from low beam t,o high
beam or high beam to low
beam, pull ,the
turn
signal
lever toward you. Then
release it. When the high
beams
are
on, this light
on
the instrument panel will
also be on.
Flash-To-Pass
Feature
This
feature lets you use your high-beam headlamps
to
signal a.
driver.
in
front
of
,you that you want to pass.
It
works even
if
your headlamps are
off.
To
use it, pull the turn signal lever toward you, but not
so
far that you hear a click.
..
,,
~
.
If
your headlamps are
off
or on low beam, your
.
high-beam headlamps will
turn
on.
They’ll stay on as
long as you hold the lever toward you and-the
high-beam indicator
on
the dash will come on. Release
the lever to
turn
the high-beam headlamps
off.
.-
..
.
2-33