Buick Le Sabre Automobile User Manual


 
Vehicles are delivered programmed in Mode
5.
To
change to another mode:
1.
2.
3.
4.
Press and hold the power door lock switch.
Press the opened trunk button on the transmitter.
The transmitter will remain
in
its current mode.
Press the opened trunk button again. Each time
the
opened trunk button is pressed, the transmitter will
advance to the next mode.
Release the power door lock switch.
Delayed
Locking
(Option)
Note: This feature is available only if you request
your dealer to activate this option. After initial
activation, you can turn this feature on and
off
by
using the following procedure.
This
feature lets the driver delay the actual locking
of
the
vehicle.
When
the power door lock switch is pressed with
the key removed from the ignition, and the driver’s door
open, a chime will sound three times
to
signal that the lock
delay mode is active. When all doors have been closed, the
doors will lock automatically after tive seconds.
If
any
door is opened before this, the five-secoxld timer will reset
itself once all the doors have been closed again.
Pressing the door lock switch twice within two seconds
will override this feature.
The delayed locking feature can be turned on or
off
for
each remote transmitter.
To
turn the feature on:
1.
2.
3.
4.
Press and hold the power door lock switch
throughout this procedure. All the doors will lock.
Press the UNLOCK button on the remote
transmitter. The lock delay is still
off
and all doors
will remain locked.
Press the UNLOCK button on the remote
transmitter again. Lock delay is now active and all
doors will unlock.
Release the power door lock switch.
To turn this feature off, repeat the previous procedure.
If your vehicle is not equipped with the Remote Keyless
Entry, use the following procedure
to
turn
the feature on:
1.
With
the
ignition on, press and hold
the
power door
lock switch. All doors will lock.
2.
Toggle the headlamps switch seven times (off to on
is one toggle). The doors will unlock to confirm that
the feature
is
now on.
3.
Release the power door lock switch.
To turn the feature
off,
repeat the previous procedure.
2-9