Filter
Top Products
Your tape bias is set automatically.
SEEK:
Press the forward or backward arrow to search
for the next or previous selection on the tape. Your tape
must have at least three seconds of silence between each
selection for
SEEK
to work. The sound will be muted
while seeking.
((
(3):
Press this button to reverse the tape rapidly.
Press
it
again
to
return to playing speed. The radio will
play while the tape reverses.
bb
(4):
Press this button to advance quickly to another
part of the tape. Press the button again to return to
playing speed. The radio will play while the tape
advances.
SIDE
(5):
Press this button to change the side
of
the
tape that is playing.
00
(6):
Press this button to reduce background noise.
The display will show either
OFF
or
ON
for a few
seconds when
you
press the button.
Dolby@ Noise Reduction is manufactured under a
license from Dolby Laboratories Licensing Corporation.
Dolby and the doub1e-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
EJECT
Press this button
to
remove the tape. The radio
will play.
CLN:
This message may appear on the display.
If
it
does, your cassette tape player needs to be cleaned. It
will still play tapes, but you should clean it as soon as
possible to prevent damage to your tapes and player.
See “Care
of
Your Cassette Tape Player” in the Index.
After you clean the player, press and hold
EJECT
for
five seconds to reset the
CLN
indicator. The radio will
display
---
to show the indicator was reset.
2
1A