Filter
Top Products
3.
Be sure that the belt is not twisted and it lies flat.
4.
Buckle, position and release the safety belt as
The elastic cord must be under the belt and the guide
described
in
“Rear Seat Outside Passenger Positions”
on top. earlier in this section. Make sure that the shoulder
belt crosses the shoulder.
To
remove and store the comfort guides, just perform
these steps in reverse order. Squeeze the belt edges
together
so
that you can take them out from the guides.
Pull
the guide upward
‘to
expose its storage clip, and
then slide the guide onto the clip. Rotate the guide and
clip inward and in between the seatback and the interior
body, leaving
only
the loop
of
elastic cord exposed.
1-29