Filter
Top Products
Customizing Your Memory
Door
Locks
Feature
You can program the memory door locks feature to
change to the following modes:
Mode
0
1
2
3
Operation
No
automatic door lock or unlock.
All doors automatically lock
when shifted out of PARK (P).
No
automatic door unlock.
All
doors automatically lock
when shifted out of PARK (P).
Only the driver’s door
automatically unlocks when
shifted into PARK (P).
All doors automatically lock
when shifted out of PARK (P).,
All the doors automatically unlock
when shifted into PARK (P).
Vehicles are delivered programmed in Mode
3.
To change modes:
1
..
2.
3.
4.
5.
Close
all
doors and turn the ignition on. Keep all
doors closed throughout this procedure.
Press and hold the driver’s power door lock switch
through Step
4.
Press the LOCK button on the Remote Keyless Entry
transmitter. The automatic door locks will remain in
the current mode.
Press the LOCK button on the transmitter aga*.
Each time the transmitter’s LOCK button is
pressed, the mode will advance by one, going from
3
to
0
to
1,
etc.
Release the power door lock switch. The
automatic door locks will remain in the most
recent mode selected.