Filter
Top Products
EJECT
The system has two EJECT buttons. Press the
button near the CD slot
to
remove a disc. Press the button
near the tape slot to remove a tape. The radio will play.
CLN:
This message may appear on the display.
If
it
does, your cassette tape player needs to be cleaned. It
will still play tapes, but you should clean it as
soon
as
possible to prevent damage to your tapes and player.
See “Care of Your Cassette Tape Player” in the Index.
After you clean the player, press and hold EJECT for
five seconds to reset the CLN indicator.
The
radio will
display
---
to show the indicator was reset.
Your cassette tape player automatically reduces
background noise from tapes encoded with Dolby
NR.
You may turn Dolby off by pressing the number
six preset.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and
the
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Playing
a
Compact
Disc
Insert a disc partway into the slot, label side
up.
The
player will pull it in. The disc should begin playing.
If
you want to insert a CD while the ignition or the radio
is off, first press EJECT
or
RECALL.
If you’re driving
on
a very rough road or if it’s very hot,
the disc may not play and an error code may appear
on
the display. Press RECALL to take the error code
off
the
display. When things get back to normal, the disc should
play.
If
the disc comes out, it could be that:
0
The disc
is
upside down.
0
It is dirty, scratched or wet.
0
It is very humid.
(If
so,
wait about an hour and
try again.)
3-25