Buick Le Sabre Automobile User Manual


 
HI
The
FAN
control
is
used to select the speed of the
blower fan and the force of air you want. There are four
speeds to choose from. Moving the lever between LOW
and HIGH will decrease or increase the fan speed. The
fan will be
off
when the system is off.
This lever regulates the temperature
of
the air coming
through the system. Move the TEMPERATURE lever to
change the temperature
of
the air coming through your
outlets. Move the lever between COOL and WARM to
lower or raise the temperature.
lode
Co
-01s
The buttons on your system allow you to choose
settings to deliver air through lower, middle or
windshield outlets.
RECIRC:
Press this button to limit the amount of air or
cool the air in your vehicle. To turn off RECIRC, press
the button again. If you select FRONT defrost
or
BLEND while RECIRC is selected, the system will
automatically turn off RECIRC to prevent fogging.
VENT
This setting directs airflow through the middle
instrument panel outlets. The air conditioning
compressor is not working when
VENT
is selected.
HTR:
This button directs air out
of
the heater outlets.
Most of the air will come from the floor outlets while
some
of
it
will flow through the windshield and side
window outlets. The air conditioning compressor is not
working when HTR is selected.
BLEND:
When BLEND is selected, the airflow will be
split between the windshield and the floor outlets. The
air conditioning compressor will be operating.
FRONT:
This setting directs most
of
the
airflow toward
the windshield.
OFF:
The ventilation system always allows fresh air to
flow through your Buick when the vehicle is moving.
The system will try to keep the air at a previously
chosen temperature. When the system is off, the blower
fan is also off.
MAX:
This setting directs airflow through the middle
instrument
panel
outlets.
NORM:
This setting cools the air entering your vehicle
and directs
it
through the middle instrument panel outlets.
BI-LEV:
This setting directs warm air to the floor and
cooler air to the middle instrument panel outlets.