Radiator Pressure Cap
Power Steering Fluid
NOTICE:
Your radiator cap is a
15
psi
(105
kPa)
pressure-type cap and must be tightly installed to
prevent coolant
loss
and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.
When you replace your radiator pressure cap, an
AC?
cap is recommended.
Thermostat
Engine coolant temperature is controlled by a thermostat
in the engine coolant system. The thermostat stops the
flow
of
coolant through the radiator until the coolant
reaches a preset temperature.
6-23