Filter
Top Products
Removing the Flat Tire
and
Installing
the
Spare
Tire
1.
Use the wheel wrench to loosen the wheel
nuts,
but
don't remove them.
2.
3.
Attach the wheel wrench to the bolt on the end
of
the
jack and rotate the wrench clockwise to raise the jack
head a few inches.
Near each wheel well is a notch in the frame to put
the jack head into. The front notch is
10
inches
(25
cm)
back
from the front wheel well. The rear
notch
is
8
inches
(25
cm) forward
from
the
rear
wheel well.
5-27