Filter
Top Products
If your vehicle has a wheel
cover, remove it by using
the flat end
of
the
wheel wrench.
If
your vehicle has this
aluminum wheel,
you
may
have plastic wheel nut caps.
Use the wheel nut wrench
to remove the wheel nut
caps and to loosen the
wheel nuts.
Pry along the edge of the wheel cover until it comes off.
Be careful, the rim edges may be sharp. Don’t try
to
remove it with your bare hands.
Note: When replacing any wheel cover, carefully line up
the tire valve stem and the notch
in
the wheel cover.
When reinstalling the decorative nut caps, tighten the
caps snugly with the wheel wrench, then continue
one-eighth rotation for steel caps and one-quarter
rotation for plastic caps.