Filter
Top Products
Then, without shutting
off
the engine, follow
these steps:
1.
The transaxle fluid
dipstick top
is
a
round loop and
is next to the
brake master
cylinder behind
the engine block.
Pull out the
dipstick and wipe
it with
a
clean rag
or paper towel.
2.
Push
it
back
in
all the way, wait three seconds and
then pull it back out again.
3.
Check both sides
of
the dipstick, and read the lower
4.
If
the fluid level is in the acceptable range, push
the
level. The fluid level must be in the cross-hatched area.
dipstick back in all the way.