Filter
Top Products
Dual
Automatic ComforTemp
Climate Control (Option)
If your Buick has the dual automatic comfortemp
climate control option, the following information tells
you how it works.
You
will hear
a
beep each time
a
button is pushed and
a
small light on the button will indicate which buttons are
active. The lights are on all buttons except TEMP, FAN
and AIR FLOW. The display will show fan, temperature
and mode settings for
a
few seconds whenever AUTO is
selected, and then display the outside temperature. The
outside temperature reading
is
most accurate when
driving. During stops, the display shows the previous
temperature for best accuracy and system control.
If
the display is flashing after the system is started, you
should see your dealer for service.
Temperature
Button
To
adjust the temperature you want maintained inside
the vehicle, push the
TEMP
button.
If
you want warmer
air, push the red arrow. If you want cooler air, push the
blue arrow. Note the degree selection on the display.
Fan
Button
The speed of the blower fan is controlled automatically if
you have the system set for
AUTO.
Pressing the FAN
button
will
display and hold the current blower fan setting.
If you want the blower fan to run at
a
lower speed, push
the bottom of the FAN button. The fan speed will
decrease with every push of the button until the lowest
speed is reached.
If
you want to increase the fan speed,
push the top of the FAN button. Notice the fan
indicators on the display.
Mode
Controls
Your comfort control system has different buttons that
allow air delivery through the floor, middle or windshield
outlets. The system will stay in the selected mode if
a
different button
is
pressed or the AUTO button is pressed.
3-3