Filter
Top Products
6.
7.
To
install, attach the
wire connector
(A)
to
the plastic base making
sure the lack tab
(B)
is
over the lock
(C).
Install the bulb by
putting the small tab
(D)
into the small notch in
the lamp
(E).
8.
Turn
the
bulb socket one-quarter turn clockwise to
lock it into place.
When reinstalling the headlamp assembly into the
headlamp mounting panel make sure the tab is
properly engaged in the panel slot.
illamps
For
bulb type, see “Replacement Bulbs” in the Index.
1
1.
Open the
trunk.
Pull the carpet
away
from
the rear
area to access the
trunk
taillamp bulbs.
6-31